x
  • MEM30305

Certificate III in Engineering - Fabrication Trade

Casting and Moulding
At a glance

At a glance

Progress your career in manufacturing with this specialised, skilled qualification. Complete this course as part of your apprenticeship to become a trade qualified caster/moulder.

COURSE OUTCOME

MEM30305 Certificate III in Engineering - Fabrication Trade

Get Started Today
Enquire nowApply now
Course overview

Course overview

Complete this course as part of your apprenticeship to become a trade qualified caster/moulder. You will gain transferable skills in design and manufacturing that are highly sought after in a broad range of industries including engineering and construction.

In this course you will gain the skills to produce sand moulds and cores which are used to make ferrous and non-ferrous metal castings for the engineering, transport and construction industries. You will learn how to make sand cores to create internal shapes in castings, pour molten metal into moulds to produce metal castings, heat treat completed castings, and work with computer simulation programs.

Successful completion of this course will allow you to become a trade recognised caster/moulder and continue to progress your career in technical design and fabrication.

Units

The successful achievement of this qualification requires you to complete all units listed on your individual training plan.

UNIT CODE UNIT NAME
MEM12024A
Perform computations
MEM13014A
Apply principles of occupational health and safety in the work environment
MEM14004A
Plan to undertake a routine task
MEM14005A
Plan a complete activity
MEM15002A
Apply quality systems
MEM15024A
Apply quality procedures
MEM16006A
Organise and communicate information
MEM16007A
Work with others in a manufacturing, engineering or related environment
MEM16008A
Interact with computing technology
MEM17003A
Assist in the provision of on the job training
MSAENV272B
Participate in environmentally sustainable work practices

Note: Not all electives are available at all campuses.

UNIT CODE UNIT NAME
MEM04001B
Operate melting furnaces
MEM04004B
Prepare and mix sand for metal moulding
MEM04005C
Produce moulds and cores by hand (jobbing)
MEM04006B
Operate sand moulding and core making machines
MEM04007B
Pour molten metal
MEM04008B
Fettle and trim metal castings/forgings
MEM04019B
Perform refractory installation and repair
MEM06003C
Carry out heat treatment
MEM09002B
Interpret technical drawing
MEM11011B
Undertake manual handling
MEM12023A
Perform engineering measurements
MEM13003B
Work safely with industrial chemicals and materials
MEM13004B
Work safely with molten metals/glass
MEM15004B
Perform inspection
MEM18001C
Use hand tools
MEM18002B
Use power tools/hand held operations
MEM24001B
Perform basic penetrant testing
MEM24003B
Perform basic magnetic particle testing
MEM24012C
Apply metallurgy principles

Note: Not all electives are available at all campuses.

Get Started Today
Enquire nowApply now
Ways to study

Ways to study

Get Started Today
Enquire nowApply now

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas will give you a full year of credit towards a degree with one of our partner universities.

Learn more about university pathways
  • James Cook University
  • University of Queensland
  • University of Canberra
  • Griffith University
  • Queensland University of Technology
  • University of Southern Queensland
Payment options

Payment options

No matter what your circumstances, TAFE Queensland has a payment option to suit you. If you are unsure of what's right for you, get in touch. We're here to help.

Money IconUpfront payment

This is the total cost of the course you need to pay when you enrol if you are not eligible for a subsidy or concession.

Learn more

Money IconPayment plan

If you have difficulty paying for the full cost of a course upfront, you may be eligible for a payment plan.

Learn more

Get Started Today
Enquire nowApply now
Important Information
Important Information

Important Information


Entry requirements

There are no formal entry requirements for this course.

Selection criteria

To study an apprenticeship or traineeship program you must be indentured as an apprentice or trainee with your employer.

Employers need to be able to provide the necessary human and physical resources to qualify for an apprentice.

Resources required

You are responsible for meeting the minimum occupational health and safety requirements in practical classes. This includes the use of safety glasses, protective footwear with covered uppers, steel capped toes and non-slip soles to AS2210, leather gloves to AS2161, and hair protection. You should also wear 100% cotton drill industry-standard clothing.

If you fail to meet these minimum standards of dress, you will not be permitted entry into practical classes.

Need to know

Year 12 graduates start trade training fee free, here’s how.

To be eligible to access fee-free training, you must:

  • have completed Year 12 in Queensland and hold a Senior Statement issued by the Queensland Curriculum and Assessment Authority or equivalent certificate that confirms you have completed Year 12 in Queensland
  • enrol and start training with an approved training provider by the end of the calendar year following the completion of Year 12
  • live permanently in Queensland.

For more information visit Training Queensland.

Federal incentives may be available for employers, apprentices and trainees.  Visit the Australian Apprenticeship Centre for more information.

Assessment Methods

Skill and knowledge assessments are an essential step in progressing through your course. You may be assessed in a number of ways while you are studying at TAFE Queensland, including observation, written assessment, questioning, portfolios, work samples, third-party feedback, and through recognition of prior learning. Read more about assessment methods.

Disclaimer

All information was accurate at time of publication, however TAFE policies, tuition fees and course content is subject to change without notice. Course commencement is dependent on sufficient enrolments.

Get Started Today
Enquire nowApply now
How to apply

How to apply

Recognition of Prior Learning (RPL) and credit transfers


Fast track your way to a formal qualification by earning credit for the things you already know. Getting recognition for the skills you've gained from the workplace or previous learning means less study time for you, and getting the paper to prove you're qualified a whole lot sooner. We can assess your skills, directly apply credits from previous successful study, and give you advanced standing in your course.

Learn more

test

Get started with TAFE Queensland

If you have read and understood the student rules, refund policy, understand your fees and payment options, have a Unique Student Identifier (USI) and checked you meet the entry requirements and selection criteria for this course, you're ready to get started.

University pathways

If you want to go on to further study at university, TAFE Queensland has a pathway option to get you there. In many cases, completing one of our diplomas will give you a full year of credit towards a degree with one of our partner universities.

Learn more about university pathways
  • James Cook University
  • University of Queensland
  • University of Canberra
  • Griffith University
  • Queensland University of Technology
  • University of Southern Queensland